Hot Dip Galvanized Cross-Arm Angle Bar 1090 X 40 X 40mm With 15 Holes

Introduction

This cross-arm is used for the parallel deployment of telecom cables on poles initially dedicated to low voltage networks. Cross-arm 15 holes Angle bar metal 1090 x 40 x 40mm with 15 holes spaced by 60mm.

Installation:
On concrete poles with 2 cross-arm brackets and 2 assembly bolts 1/12
On wooden poles with a cross-arm bracket and 2 assembly bolts 1/12
Possible to install a drop anchoring plate at the extremity.

Application

Cross-arm with 15 holes can be used for pole, extension bracket, polt mounting on fiber optic and copper network

Our service

1, Product consulting service
2, Cost-saving advice
3, Fast response speed to needs
4, Professional and complete reference documents
5, Safe and cheap transportation solutions
6, 7*24 Hours After Sales Service

Contact us

Email: sales@getotelecom.com

Whatsapp/Tel: 86-18600124328

Web: www.getotelecom.com

Company

Introduction

The cross-arm 13 holes is an angled bar section used for roll-out overhead parallel lines. Equipped with 13 holes this pole bracket mounts on a bracket compatible with the pole to be equipped. Its role is to enable fastening points for deadending and suspension applications.

Thanks to its 820mm length, this pole hardware preserves cable against environmental constraints by offsetting them from the poles.

Crossarm 13 holes can receive multiple drop cross-arm brackets at it extremity, enabling thus to anchor drops perpendicularly to the main network.

Hot Dip Galvanized Cross-Arm

Cross-Arm 15Holes Angle Bar

1090 X 40 X 40mm Cross Arm

Hot Dip Galvanized Cross-Arm Angle Bar 1090 X 40 X 40mm With 15 Holes Images